If your Chevy Chase home has an in-ground lawn sprinkler system, it has a backflow preventer — and it needs to be tested. HiTrend Plumbers tests, repairs, and replaces irrigation backflow assemblies across Montgomery County.
Your backflow preventer may need work if
- Low sprinkler pressure after start-up
- Your water utility sent a testing notice
- Valves or test cocks are corroded or seized
- It hasn't been tested this year
- Water spraying or dripping from the relief valve or bonnet
- Freeze damage after winter (cracked body or popped bonnet)
Why testing is required
In WSSC Water's service area, residential irrigation backflow preventers must be field-tested every year at spring start-up, and only WSSC-licensed plumbers who are also certified cross-connection technicians can test or repair them. Results must be reported to the utility. Customers of other water systems (such as City of Rockville or Town of Poolesville water) follow their own cross-connection rules.
Chevy Chase homes: what we see
Older Chevy Chase properties that added irrigation later sometimes have backflow devices installed in tight or non-compliant spots. We check height and location requirements during testing.
Most Chevy Chase homes are on WSSC Water, which licenses plumbers in its service area and runs the cross-connection (backflow) program.
What we test
Most residential systems use a pressure vacuum breaker (PVB) or a double check valve assembly. We check that each check valve holds and the air inlet opens properly, record the readings, and handle the paperwork. If it fails, we'll tell you exactly which part and what the repair costs.
Winterizing to prevent damage
Many failures we see in spring are freeze damage. Before the first hard freeze, shut off the irrigation supply, open the test cocks slightly, and have the system blown out. A cracked backflow body means replacement, which costs more than prevention.
How HiTrend handles sprinkler backflow testing jobs in Chevy Chase
- Schedule your spring test
- Test and record results
- Repair or replace failed parts
- Retest
- Submit results as required
Seasonal tips
In spring, open the supply valve slowly to avoid water hammer. In fall, close it, open the test cocks a quarter turn, and have the lines blown out. Don't adjust internal parts — testing and repair must be done by a certified tester.
Serving Chevy Chase neighborhoods
We handle sprinkler backflow testing service throughout Chevy Chase, including Chevy Chase Village, Rollingwood, Chevy Chase Section 3, Martin's Additions, and the area around Chevy Chase Circle (ZIP 20815). Also nearby: Sprinkler Backflow Testing in Bethesda, Sprinkler Backflow Testing in Silver Spring, Sprinkler Backflow Testing in North Bethesda, Sprinkler Backflow Testing in Takoma Park.
Frequently asked questions
Can freezing damage the backflow?
Yes. Water left inside can crack the body or pop the bonnet. Proper winterizing prevents it.
Do I need backflow for a well-only system?
If your irrigation is fed only by a private well with no connection to public water, requirements differ. We can help you figure out what applies.
How long does testing take?
Usually 20–30 minutes per assembly if it passes.
How often does backflow need testing in Chevy Chase?
In WSSC Water's service area, annually at spring start-up. Other water systems set their own schedules.