A backflow preventer keeps fertilizer, pesticides, and yard runoff from being pulled back into your drinking water. For Montgomery Village homeowners with irrigation, testing it is both a safety step and a requirement.
Your backflow preventer may need work if
- Water spraying or dripping from the relief valve or bonnet
- Freeze damage after winter (cracked body or popped bonnet)
- Low sprinkler pressure after start-up
- Your water utility sent a testing notice
- Valves or test cocks are corroded or seized
- It hasn't been tested this year
Why testing is required
In WSSC Water's service area, residential irrigation backflow preventers must be field-tested every year at spring start-up, and only WSSC-licensed plumbers who are also certified cross-connection technicians can test or repair them. Results must be reported to the utility. Customers of other water systems (such as City of Rockville or Town of Poolesville water) follow their own cross-connection rules.
Montgomery Village homes: what we see
Irrigation is common in Montgomery Village's larger-lot neighborhoods. Many systems are 15–25 years old and their backflow assemblies need rebuild kits or replacement.
Most Montgomery Village homes are on WSSC Water, which licenses plumbers in its service area and runs the cross-connection (backflow) program.
What we test
Most residential systems use a pressure vacuum breaker (PVB) or a double check valve assembly. We check that each check valve holds and the air inlet opens properly, record the readings, and handle the paperwork. If it fails, we'll tell you exactly which part and what the repair costs.
Winterizing to prevent damage
Many failures we see in spring are freeze damage. Before the first hard freeze, shut off the irrigation supply, open the test cocks slightly, and have the system blown out. A cracked backflow body means replacement, which costs more than prevention.
How HiTrend handles sprinkler backflow testing jobs in Montgomery Village
- Schedule your spring test
- Test and record results
- Repair or replace failed parts
- Retest
- Submit results as required
Seasonal tips
In spring, open the supply valve slowly to avoid water hammer. In fall, close it, open the test cocks a quarter turn, and have the lines blown out. Don't adjust internal parts — testing and repair must be done by a certified tester.
Serving Montgomery Village neighborhoods
We handle sprinkler backflow testing service throughout Montgomery Village, including Stedwick, Whetstone, Lake Whetstone, The Points, and the area around Lake Whetstone (ZIP 20886). Also nearby: Sprinkler Backflow Testing in Colesville, Sprinkler Backflow Testing in Derwood, Sprinkler Backflow Testing in White Oak, Sprinkler Backflow Testing in Washington Grove.
Frequently asked questions
Who can test my backflow preventer?
A licensed plumber who is also a certified cross-connection technician.
What happens if my backflow fails?
It needs repair (often a rebuild kit) or replacement, followed by a passing retest.
Can freezing damage the backflow?
Yes. Water left inside can crack the body or pop the bonnet. Proper winterizing prevents it.
Do I need backflow for a well-only system?
If your irrigation is fed only by a private well with no connection to public water, requirements differ. We can help you figure out what applies.