During a Bethesda kitchen remodel, the gas line for the range needed to move about a foot to the right. Here is how we planned it: two visits, a permit and inspection, and new gas piping in place of the old yellow flexible line.


The question
In a kitchen being remodeled, the gas line for the range came up through the floor about a foot from where the new range would sit. The plan was to move the line about a foot to the right and cap it off. Then, once the new floors and cabinets were in, about two to three weeks later, someone would come back and connect the range.
What's going on
Any change to gas piping in Montgomery County needs a permit and an inspection, even inside a remodel that didn't need one for anything else. That protects the homeowner if something goes wrong later. The existing range line is yellow-jacketed flexible gas tubing (CSST). Our plan was to replace it instead of adding onto it, using a newer jacketed flexible gas pipe of the kind inspectors allow.
What we recommended
- Recommended pulling a gas permit and scheduling the inspection.
- Visit 1: run the new gas line to the new range spot, cap it, and pressurize it for the inspector.
- Visit 2: after the inspection passes and the floors and cabinets are in, make the final connection to the range.
- Remove the old yellow flexible gas line, so there is no tie-in between old and new piping.
- Include a pressure test of the new gas line.
- Agree that if anything on site differs from the photos, we discuss it with the homeowner before doing more work.
What the estimate covers
- WardFlex flexible gas piping
The result
This is an estimate. The homeowner approved it and the work is scheduled, but it has not been done yet.
Tips for Bethesda homeowners
- If a remodel moves a gas range, cooktop or dryer, plan the gas work early. The line often has to be run and inspected before the floors and cabinets go in.
- Ask your plumber whether the estimate covers the permit, the inspection, and the return visit for the final hookup.
- Ask what gas pipe will be used, and whether the old line comes out or gets tied into.
- Never cap or move a gas line yourself. Shut off the gas at the appliance valve and call a licensed plumber.

