A Silver Spring home inspection report listed the basement sump pump as failed and called for a replacement. Right after closing, we replaced it with a new 1/3 HP Zoeller M53 and a new check valve, exactly as the report called for, and the new homeowners were happy with the result.


The problem
The buyers of a Silver Spring home showed us their pre-purchase home inspection report. It listed the basement sump pump as failed and to be replaced. They wanted it fixed right after closing, as soon as they got into the home, so the basement was protected from day one.
What our technician found
A sump pump keeps groundwater from flooding a basement, so home inspectors test it and flag one that fails. Replacing a failed sump pump is usually a simple, same-day fix: replace the pump, and replace the check valve on the discharge pipe at the same time, so the key working parts of the system are new.
What we did
- Reviewed the plumbing section of the buyers' inspection report.
- Removed the failed sump pump from the basement pit behind the water heater.
- Installed a new 1/3 HP Zoeller M53 automatic sump pump.
- Installed a new check valve on the discharge line.
- Flushed out the sump pit.
- Ran the pump to check its operation.
Parts used
- Zoeller M53 1/3 HP automatic sump pump
- Check valve
The result
The sump pump item on the inspection report was taken care of. The new pump and check valve are installed, the pump worked perfectly when tested, and the new homeowners were happy with the result.
Tips for Silver Spring homeowners
- Buying a home and the inspection report says the sump pump failed? Get a written price to replace it before or right after closing. It is far cheaper than a flooded basement.
- Send your plumber the plumbing pages of the inspection report. A clear list of items makes for an accurate, upfront estimate.
- Replace the check valve when you replace the pump. An old check valve can let water fall back into the pit, so the pump runs more than it needs to.
- Test your sump pump every few months: pour a bucket of water into the pit. The pump should turn on, empty the pit and shut off by itself.
- Keep the area around the pit clear so the pump can be reached quickly if it ever needs service.

